Particle Matter Sensor
key sensor features
Designed to monitor particles in mission critical applications.
Measures total mass concentration values for PM1, PM2.5, PM4 and PM10 in µg/m3
- compact & affordable optical dust sensor made in Switzerland.
- reports highest particle found (PM1, 2.5, 4 or 10)
- P1 and PM2.5: ±10 µg/m3 @ 0 to 100 µg/m3
- PM4 and PM10: ±25 µg/m3 @ 0 to 100 µg/m3
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors. custom color options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit.
- alerts via SNMP Traps, email or SMS.
- wired or optionally wireless.
- integrates via Modbus TCP, SNMP.
- optional MQTT integration - requires a different firmware of the BASE-WIRED.
- Modbus RTU RS-485 hardware versions available for specific sensors enabling direct integration with your own gateway & controllers.
- for other sensors, integrates over RS-485 is available using the optional Modbus RTU module.
- Gas and Thermal Imaging sensors require the optional BASE-FW-SSLS firmware addon to operate.
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
Wired or Wireless
By default all sensors are connected to the SensorGateway (BASE-WIRED) using a CAT6 or higher RJ45 cable.
Using the optional Wireless Hub & Node modules, any sensor can be turned into a wireless sensor.
Wireless Hub & Nodes
Using the optional Wireless Hub & Node modules, any sensor can be turned into a wireless sensor.
Wireless Hub & Nodes
Customize your sensor: color / enclosure / logo
custom color & logo
Not a fan of orange? Want the sensors to match the color of your mission critical infrastructure equipment? Want to reflect your corporate color? Want to feature your own logo?
custom enclosure
Need the sensors in a custom enclosure to fit your application? Together with our partners, we can help to design special enclosures to meet your requirements.
RS485 (Modbus RTU) version
Looking to integrate this sensor with your own gateway or control system?
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input